C-Tec XFP502-CA XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)

Name: C-Tec XFP502-CA XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)
Brand: CTEC
SKU: XFP502/CA
Price: 649.8 GBP
Availability: InStock

Roll over image to zoom in Click on image to zoom

Fast Delivery

XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)

Addressable Fire Systems C-Tec Cast XFP 1-2 Loop Fire Panels

C-TEC’s tried and trusted XFP two loop 32 zone addressable fire panel – now available with C-TEC’s own CAST digital fire alarm system protocol and fully certified to EN54 parts 2, 4 & 13.

With two powerful 40V 450mA loop drivers allowing the connection of up to 255 CAST devices per loop, the installation of a robust, feature-packed addressable fire detection and alarm system has never been easier.

Always thought of the XFP as an entry-level fire panel? Think again. Thanks to CAST’s high speed data transmission and two speedy soft addressing options (automaic via the panel or manually via a handheld programmer/device tester), it is undoubtedly one of the most powerful two loop fire panels around. This, and its ability to sit on a network of up to 8 XFP master panels, makes it ideal for use in small to medium sized stand-alone applications and larger, more sophisticated installations alike.

Technical Specifications:

Protocol/compatibility	C-TEC CAST.
Mains supply	230V 50/60Hz.
Mains rated current	680mA maximum.
Internal power supply	27Vdc nominal.
Total output current limited to	3A @ 230Vac (Imax.A 270mA; Imin. 70mA).
Quiescent current	100mA (2 loops unloaded).
Max battery size and type	2 x 12V 7Ah VRLA connected in series.
No. of loop drivers	2.
Max. loop output current	450mA (40V max).
Max. loop length	1KM.
Max. addressable devices per loop	255.
No. of conventional sounder circuits	2 (Max. length per circuit is 500m).
EOL resistor value	6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Max. sounder output current	400mA.
Auxiliary relays	3 x Programmable Relays (programmable from C&Es). 1 x Fault Relay (active when no faults are present). Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.
Other outputs	24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA.
Auxiliary inputs	2 x Programmable Inputs (programmable from C&Es). Connect to 0V to trigger, Max. input voltage 27V (non-latching).
PC connection	PC connection via RS232 molex connector (supplied in XFP507 upload/download software kit); No printer connection available.
Indicators	2 line x 40 character backlit display; 32 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; Syst
Connections	Fixed, largest acceptable conductor size 1mm2.
Expansion connections	2-wire RS485 non-redundant network/repeater connection available via optional AFP711 network card. Max. 8 mains per network or 8 repeaters per non-networked main. Limit 1KM (main panel network) or
Product dimensions (mm)	410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Hole required for semi-flush mounting = 412 W x 255 H x 50 D mm (requires XFP385 bezel).
Construction & finish	Metal.
IP Rating	IP30.
Weight	4.5kg (without batteries).
Operating conditions/temperature	-5ºC to +40ºC. Max relative humidity: 95%.

Downloads

Download product data sheets

Recover password

C-Tec XFP502-CA XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)

C-Tec XFP502-CA XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)

Description

Technical Specifications:

Customers also bought