C-Tec XFP510-16 XFP 16 Zone Repeater Panel (all protocols)
XFP 16 Zone Repeater Panel (all protocols)Addressable Fire Systems C-Tec Cast XFP 1-2 Loop Fire Panels
- Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
- Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
- Includes an on-board fault relay.
- Requires its own dedicated Mains power and battery back-up supply.
- A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
- Communication between the XFP Main panel and Repeater requires a CFP761 network driver card (fitted as standard in all XFP510-16s, available as an optional extra on Main XFP 16 Zone panels).
- Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.
Technical Specifications:
| Protocol/compatibility |
Compatible with C-TEC's XFP CAST, Apollo XP95/Discovery and Hochiki ESP main panels. |
|---|---|
| Mains supply | |
| Mains rated current | |
| Internal power supply | |
| Total output current limited to | |
| Quiescent current | |
| Max battery size and type | |
| Auxiliary relays |
Fault (Failsafe; Capable of switching 1A @ 30V DC; Must not be used for switching Mains voltages). |
| PC connection | |
| Indicators | |
| Expansion connections |
On board CFP761 network driver card facilitates the connection of additional XFP Repeaters. |
| Product dimensions (mm) | |
| Construction & finish | |
| IP Rating | |
| Weight | |
| Operating conditions/temperature |
Specification
Gtin |
5056059608280 |
Downloads
Download product data sheets